• Contains no fluorides

• pH 5.5

• Fast acting

• Designed for immersion cleaning

Oxidised Aluminium Fan Spacer before and after being soaked for 15 mintues at room temperature.

Piston before cleaning
(Click on picture for larger view)

Piston after soaking in heated Aluminate for 10 minutes.

• Aluminate is purchased ready to use and can be used hot or cold.  Cleaning times can be accellerated by increasing the temperature of Aluminate to between 48°C to 60°C.

• Aluminate is a liquid compound designed for removing Aluminium Oxide and brightening Aluminium in recirculating washers, vibratory polishing units or dip tanks.

• The Aluminate product is perfect for use in electro-pulse tanks as a direct replacement for acid type products. Like Evapo-Rust this product is biodegradable and extremely user friendly.

• Used in a dip tank situation and within the temperature parameters above, items should be cleaned within 5 to 15 minutes.

• After cleaning, remove parts and rinse with water.

Non-Acidic Aluminium De-oxidizer and Cleaner

52 year old chevy carburetor, in worse for wear condition.

Same 52 year old carburetor after soaking in 60°C Aluminate for 5 mins. This carburetor was lightly scrubbed with an old toothbrush, rinsed and then soaked in Evapo-Rust to clean linkages.

This carburetor was in the same condition as far left picture. The same process was used with outstanding results. All gaskets and seals are left in perfect condition, and carburetor is now ready for re-use.

TM